How to Create Mesh Network With Two Routers?

If you use two routers to create a mesh network, it can help in improving your Wi-Fi coverage and enhance the network speed. It gives seamless and safe connectivity throughout any larger house or a big office with a mesh network of multiple routers.

So, how to create a mesh network with two routers?

To create a mesh network with two routers, all you need to do is, configure one router as primary and the other as secondary and it’ll extend the wireless coverage of the connection. Here is the step-by-step approach to how to create a mesh network with two routers. Let’s get started!

Table of Contents

How to Create a Mesh Network With Two Routers?

Creating Mesh Network With Two Routers — Source: toolbox.com

Here comes the step-by-step guide-

Step 1: Gather The Tools

You will need two routers and two ethernet cables to create a mesh seamless network. However, if your routers don’t have built-in mesh capabilities, then try to find a mesh networks system like Eero or Google WiFi.

Step 2: Check For “Bridge Mode”

Where you allow two wireless routers to work together to enlarge the range of a wireless network, that’s what “Bridge” implies. If you want both of your routers in one network, then it must have the”bridge mode” otherwise you won’t be able to connect them. You can look for “WDS”, ” Bridging Mode”, and “Repeater Function” in your router documents to find out if it’s supported or not.

Step 3: Reset The Routers

Resetting the routers at first ensures the beginning of a clean and safe set-up. For this, from the factory default settings, reset both routers. You will find the reset buttons at the back of the router and press them with any paper clip or bobby pin.

Step 3: Decide The Primary Router

The primary router will be that which you’ll connect directly with the modem. If you have a combination modem and router, then it’ll be your main router.

Step 4: Connect Primary Router With Ethernet Cable

Now, with an ethernet cable, attach the primary router to the modem. Then, this router will provide internet throughout the entire network system.

Step 5: Go to The Router’s Configuration Interface

At this point, you can navigate the Primary router’s configuration interface by using a mobile or PC connected to the router. Now, open a web browser and on the router’s default IP address bar type, for example, 10.0.0.1 or 192.168.1.1. Now, log in with the default username and password given by the manufacturers.

Step 6: Find Option “Mesh Networking”

In the router’s settings, find options like “Mesh Network”, ” Mesh Mode” or “Wireless Backhaul”. If you enable these options, you will allow the routers to communicate with one another and build a seamless mesh network.

Step 7: Set Up the WiFi Connection

Time to configure the WiFi connection with the primary router. For this, select a WiFi network name(SSID) and a secured password. Make sure that both frequencies are 2.4GHz and 5GHz, as some devices only support these frequencies.

Step 8: Connect The Secondary Router

Ensure to position the second router in an area to provide better Wifi coverage. Now, connect the secondary router to any power supply and wait for it to boost up completely. Then, with an ethernet cable, connect one of the LAN ports on the secondary router to one of the LAN ports on the main router

Step 9: Enable the Secondary Router’s Configuration Interface

Just like the primary router, access to the Secondary Router’s Configuration Interface. Using a PC or mobile, go to the interface. Then, in the web browser address box type the IP address and log in with default information.

Step 10: In Secondary Router Disable DHCP Option

On the secondary router’s settings turn off the DHCP(Dynamic Host Configuration Protocol). This allows the main router to handle all the IP addresses for all devices in the network and prevents any routing conflicts.

Step 11: On Secondary Router Set-Up WiFi Settings

Just as the SSID and password of the primary router, using those access the wireless network of the secondary router. It’s better to use different Wi-Fi channels to avoid any interference or conflict.

Step 12: Testing Time!

After you finish access to both routers, test the WiFi connection in different areas of your office or house. The devices should provide a very clear and speedy network as they switch through the main and secondary routers.

So, that’s all for today. Following these steps and instructions, you can use two routers for a mesh seamless network. Plus, you can add additional routers for bigger areas or expand your coverage! Best of luck!

If you want you can also check the process of connecting landline phone to a wifi router.